Total
WaterBoss 700
Complex whole-house water softening and iron filtration system of household water, with a fast regeneration system.
Filtration rate - up to 1.500 l/h
Dimensions - 38 х 48 х 65 cm
Regeneration duration - 18 min
.
Filtration rate - up to 1.500 l/h
Dimensions - 38 х 48 х 65 cm
Regeneration duration - 18 min
.
4900.00 Dhs
Add to compare
Cabinet water softener that effectively solves the majority of well water issues at a time. The maintenance is easy: thanks to the built-in self-cleaning filter there is no need to change a filter. The model is exceptionally salt-efficient. Requires as little as 61 liters of water and only 1.14 kg of salt to regenerate. It's used to remove magnesium and calcium hardness ions, eliminate manganese and iron from water in local and municipal water supply networks - wells, artesian wells and other sources. System provides soft, purified water for a long time. Effectively purifies water containing iron and manganese and a hardness of up to 12,000 mg/l, consumes a minimum amount of water for regeneration.
Softening and iron removal system is simple and easy to maintain, compactness and high performance characteristics make it possible to use even where a special place was not provided in advance. A silent control valve ensures uninterrupted operation and regeneration of the filter. The programmable controller has an intellectual control system and flexible settings, thanks to a backup power source, it saves settings for up to 7 days in the event of a power outage. The built-in self-cleaning filter retains mechanical particles up to 20 microns in size and does not require replacement of cartridges, the system only requires periodic filling with salt. The unique design of the filtration unit and flow distributor allows the use of super fine resin and counter-current regeneration with clean water in a compressed layer. The mesh installed in the salt tank allows to obtain a clean salt solution of the desired concentration, due to which significant - up to 70% - savings on salt during regeneration are achieved.
Filtration rate: 1.5 m3/hour
Dimensions: 375 x 475 x 654 mm
Gross weight: 39 kg
Total maximum compensated hardness (Fe+Mn+Ca): (24) mgeq/l
Maximum content of iron and manganese ions in water: 10 mg/l
Minimum pH: 6
Working water temperature: 4 - 49 °C
Working performance: 1.5 m3/hour
Filtration tank size: 26.7 x 35.6 cm
Maximum performance: 2.3 / 0.96 m3/hour / pressure drop, atm
Maximum drainage flow during regeneration (backwash): 0.5 m3/hour
Water pressure (minimum / maximum): 1.4 / 8 atm
Minimum required water flow: 1.14 atm
Maximum chlorine content: 1 mg/l
Regeneration time: 33 min (HC - high capacity)
Regeneration time: 18 min (NE - high efficiency)
Water consumption for regeneration: 95 l (HC - high capacity)
Water consumption for regeneration: 61 l (NE - high efficiency)
Salt reserve: 55 kg
Power supply: 220/12 VAC, 1 phase, 50 Hz
Connection dimensions: ¾" NMPT
Softening and iron removal system is simple and easy to maintain, compactness and high performance characteristics make it possible to use even where a special place was not provided in advance. A silent control valve ensures uninterrupted operation and regeneration of the filter. The programmable controller has an intellectual control system and flexible settings, thanks to a backup power source, it saves settings for up to 7 days in the event of a power outage. The built-in self-cleaning filter retains mechanical particles up to 20 microns in size and does not require replacement of cartridges, the system only requires periodic filling with salt. The unique design of the filtration unit and flow distributor allows the use of super fine resin and counter-current regeneration with clean water in a compressed layer. The mesh installed in the salt tank allows to obtain a clean salt solution of the desired concentration, due to which significant - up to 70% - savings on salt during regeneration are achieved.
Filtration rate: 1.5 m3/hour
Dimensions: 375 x 475 x 654 mm
Gross weight: 39 kg
Total maximum compensated hardness (Fe+Mn+Ca): (24) mgeq/l
Maximum content of iron and manganese ions in water: 10 mg/l
Minimum pH: 6
Working water temperature: 4 - 49 °C
Working performance: 1.5 m3/hour
Filtration tank size: 26.7 x 35.6 cm
Maximum performance: 2.3 / 0.96 m3/hour / pressure drop, atm
Maximum drainage flow during regeneration (backwash): 0.5 m3/hour
Water pressure (minimum / maximum): 1.4 / 8 atm
Minimum required water flow: 1.14 atm
Maximum chlorine content: 1 mg/l
Regeneration time: 33 min (HC - high capacity)
Regeneration time: 18 min (NE - high efficiency)
Water consumption for regeneration: 95 l (HC - high capacity)
Water consumption for regeneration: 61 l (NE - high efficiency)
Salt reserve: 55 kg
Power supply: 220/12 VAC, 1 phase, 50 Hz
Connection dimensions: ¾" NMPT
