Total
WaterMax I52 APQ 220
Comprehensive water treatment system combining softener and an iron remover. Designed for commercial and industrial sector. Softener equipped with additional reagent tank, which makes it possible to solve a wide range of water treatment problems.
Filtration rate - 73 l/min
Dimensions - 38.1 x 76.2 x 76.8 cm
Regeneration duration - 45 min
.
Filtration rate - 73 l/min
Dimensions - 38.1 x 76.2 x 76.8 cm
Regeneration duration - 45 min
.
11000.00 Dhs
Add to compare
Water purification and softening system for commercial industry. System differs from other WaterBoss/Aquaphor series systems by presence of additional tank for a second sorbent, a bacteriostatic additive and advanced processor capabilities. This makes possible to soften and deferrize water, effectively removing nitrates, free chlorine and organic impurities, as well as disinfect water. In addition 30-liter compartment with ion-exchange resin, the filter has additional 15-liter compartment that can be filled with sorbent depending on the composition of the water and water purification tasks. The use of Bakteristat technology inhibits the growth of microorganisms inside the filter housing. Suitable for high water consumption.
Due to the absence of stagnant zones, the ion exchange resin is used to the maximum. The built-in controller collects data on actual water consumption by day of the week. Then it compares them with the consumption data for the current day. Taking into account the remaining resource of the resin, the controller decides whether to start regeneration now or postpone it to a later date. The microprocessor has an autonomous power source, due to which all settings are saved, and if the power is turned off for less than a day, the current time adjustment will not be required.
Working capacity: 2.4 - 4 m3/h
Regeneration duration: 45 min
Dimensions: 38.1x76.2x76.8 cm x 2 pcs.
Weight: 50.1 kg
1. Built-In Bypass
Simply put the water softener in bypass and it will be salt-free.
2. Smart Touch Controller
Can customize settings for specific water needs.
3. Audible Salt Alerts
Know exactly when softener needs more salt.
4. Built-In Dirt & Sediment Filter
Save money with the built-in pre-filter. Don't need replacement cartridges
5. Fast, Quiet Regeneration
Renew the resin beads quickly and quietly with as little water wasted as possible.
6. Power-Loss Protection
Customized settings are saved in case of power loss.
Max. compensated hardness: 31 mg-eq/l
Iron and manganese removal: 15 mg/l
Working pressure: 2 - 8.1 atm
Salt reserve: 90 kg
Salt consumption: 1.6-2.8 kg/reg.
Working water temperature: 5-40 °C
Power parameters: 220/50 V/Hz
Input/Output: 1"
Due to the absence of stagnant zones, the ion exchange resin is used to the maximum. The built-in controller collects data on actual water consumption by day of the week. Then it compares them with the consumption data for the current day. Taking into account the remaining resource of the resin, the controller decides whether to start regeneration now or postpone it to a later date. The microprocessor has an autonomous power source, due to which all settings are saved, and if the power is turned off for less than a day, the current time adjustment will not be required.
Working capacity: 2.4 - 4 m3/h
Regeneration duration: 45 min
Dimensions: 38.1x76.2x76.8 cm x 2 pcs.
Weight: 50.1 kg
1. Built-In Bypass
Simply put the water softener in bypass and it will be salt-free.
2. Smart Touch Controller
Can customize settings for specific water needs.
3. Audible Salt Alerts
Know exactly when softener needs more salt.
4. Built-In Dirt & Sediment Filter
Save money with the built-in pre-filter. Don't need replacement cartridges
5. Fast, Quiet Regeneration
Renew the resin beads quickly and quietly with as little water wasted as possible.
6. Power-Loss Protection
Customized settings are saved in case of power loss.
Max. compensated hardness: 31 mg-eq/l
Iron and manganese removal: 15 mg/l
Working pressure: 2 - 8.1 atm
Salt reserve: 90 kg
Salt consumption: 1.6-2.8 kg/reg.
Working water temperature: 5-40 °C
Power parameters: 220/50 V/Hz
Input/Output: 1"
