Total
Aquasanita Sabiaduo - silica
Modern brass kitchen faucet with filter connection function, combining three water sources - filtered, hot, cold. Kitchen faucet equipped with NEOPERL aerator and KEROX ceramic cartridge (35 mm).
.
.
499.00 Dhs
Add to compare
Kitchen faucet made of high-quality materials - brass, covered with special granite powder, which ensures that the coating doesn't comply with absorption requirements and doesn't leave stains on tap. Tap rotates 360°, it allows to fix handle on both the right and left sides, handle rotates 90°. Dimensions: 372х198 mm. Tap have 5 years garantee years with proper operation.
Connecting hoses: flexible G1/2“
Length of connecting hoses: 400 mm
Minimum water pressure: 0.5 bar
Maximum water pressure: 10 bar
Maximum water temperature: 80°C
Recommendations for tap care
Clean the tap regularly using only a soft cloth and non-damaging products. Use natural products, that cause no damage to the, such as a mix of food vinegar and water or soapy water. Abrasive agents cannot be used for cleaning.
Before installation
Before connecting tap to the water supply, recommended to thoroughly rinse the pipe to which the mixer will be connected, eliminating the possibility of dirt accumulation. After connecting to the pipeline, water supply valve should be gradually opened, constantly checking whether all tap connections are tight and functional. To prevent tap from leaking mechanical impurities from water pipes, before connecting necessary to install a water purification filter not exceeding 100 microns.
Installation
1. Turn off the hot and cold water supply system.
2. Remove / unscrew the aerator, to avoid clogging the aerator when the water is first turned on.
3. Secure tap with the included fasteners. Connect the flexible hoses to the tap, the flexible hose should be screwed into tap socket exclusively by hand, without using tools and without excessive turns, so as not to damage the hoses or tap.
4. Connect tap to water supply system using connecting fittings. Turn on the water supply system. Check, with closed tap, the tightness of all connections (with the shut-off valves on the appropriate pipelines closed).
5. Open cold and hot water supply for a short period of time (to flush the pipes), then close the water supply and install the aerator.
Connecting hoses: flexible G1/2“
Length of connecting hoses: 400 mm
Minimum water pressure: 0.5 bar
Maximum water pressure: 10 bar
Maximum water temperature: 80°C
Recommendations for tap care
Clean the tap regularly using only a soft cloth and non-damaging products. Use natural products, that cause no damage to the, such as a mix of food vinegar and water or soapy water. Abrasive agents cannot be used for cleaning.
Before installation
Before connecting tap to the water supply, recommended to thoroughly rinse the pipe to which the mixer will be connected, eliminating the possibility of dirt accumulation. After connecting to the pipeline, water supply valve should be gradually opened, constantly checking whether all tap connections are tight and functional. To prevent tap from leaking mechanical impurities from water pipes, before connecting necessary to install a water purification filter not exceeding 100 microns.
Installation
1. Turn off the hot and cold water supply system.
2. Remove / unscrew the aerator, to avoid clogging the aerator when the water is first turned on.
3. Secure tap with the included fasteners. Connect the flexible hoses to the tap, the flexible hose should be screwed into tap socket exclusively by hand, without using tools and without excessive turns, so as not to damage the hoses or tap.
4. Connect tap to water supply system using connecting fittings. Turn on the water supply system. Check, with closed tap, the tightness of all connections (with the shut-off valves on the appropriate pipelines closed).
5. Open cold and hot water supply for a short period of time (to flush the pipes), then close the water supply and install the aerator.
