APRO MCR - 90
Compact, commercial RO system purifies water from any source to the level of drinking water. This is the best solution for HoReCa - bars, restaurants, commercial coffee machines and other business applications. System includes pre-filtration, reverse osmosis, post-filtration, mineralization units, and a built-in permeate storage tank.
Filtration rate - up to 90 l/h
Dimensions - 49 x 47 x 55.5 cm
.
Filtration rate - up to 90 l/h
Dimensions - 49 x 47 x 55.5 cm
.
5505.00 Dhs
Add to compare
Very compact and convinient commercial type RO system, doesn't require a separate room, can be installed in kitchen. Provides clean drinking water with energy savings of up to 50%, with a daily water consumption of up to 2 m3. This is a popular solution for small and medium businesses, mainly in HoReCa sector or for private use at villas. Filtration rate - up to 90 l/h.
Patented high-frequency drainage system with automated control and high-speed flow of recirculating water - ensures membrane purity and a high degree of permeate recovery, while wastewater drainage is significantly reduced. System also features a large reduction in energy consumption, this is achieved due to the synergy of a small high-efficiency booster pump and a secondary high-performance, but low-energy recirculation pump.
Technical data
Filtration rate - 90 l/h
Number of membranes - 2
Membranes dimensions - 3012
Maximum amount of water at the inlet TDS - 1500 ppm
Salt content reduction - up to 85%
System recovery - 50%
Inlet pressure - 1-4 atm
Power consumption - 100 W/h
Power source - 24VDC (AC/DC built-in adapter)
Dimensions - 490 x 470 x 555 mm
Weight - 25 kg
Size detection (inlet, outlet, concentrate) - 3⁄8” / 1⁄4” / 1⁄4” 3G
Basic equipment
Stainless steel sensors
Dual BigBlue pre-filtration system
Built-in 2 liter water storage tank
Flush valve concentrate
Permeate drain valve
Fully equipped electronic board
Technical data
Filtration rate - 90 l/h
Number of membranes - 2
Membranes dimensions - 3012
Maximum amount of water at the inlet TDS - 1500 ppm
Salt content reduction - up to 85%
System recovery - 50%
Inlet pressure - 1-4 atm
Power consumption - 100 W/h
Power source - 24VDC (AC/DC built-in adapter)
Dimensions - 490 x 470 x 555 mm
Weight - 25 kg
Size detection (inlet, outlet, concentrate) - 3⁄8” / 1⁄4” / 1⁄4” 3G
Basic equipment
Stainless steel sensors
Dual BigBlue pre-filtration system
Built-in 2 liter water storage tank
Flush valve concentrate
Permeate drain valve
Fully equipped electronic board