Total
AKV TYTAN-150
A compact reverse osmosis system designed specifically for water purification in UAE. It operates entirely under water line pressure, requires no electricity, and features a built-in storage tank for purified water. The system removes all harmful impurities from water of any quality, especially chlorine, and enriches the water with minerals during the mineralization stage. High performance system, suitable for domestic and commercial use.
Flow rate: up to 570 l/d - 150 GPD
Dimensions: 362 х 415 х 190 mm
Min. operating pressure: 2.5 bar
.
Flow rate: up to 570 l/d - 150 GPD
Dimensions: 362 х 415 х 190 mm
Min. operating pressure: 2.5 bar
.
Price on request
Add to compare
This economical reverse osmosis system purifies water in 4 stages, delivering the highest quality purification, right down to bottled water quality. Regardless of the incoming water quality, the filter removes all impurities, including chlorine, hardness salts, nitrates, heavy metals, bacteria, and viruses. In the final stage, it infuses the water with calcium, magnesium, and potassium.
The system takes up minimal space under the sink and operates even at low water pressure. With a high capacity of up to 570 liters per day, the system is suitable for commercial use. Actual performance may vary depending on inlet pressure, temperature, and source water quality. Conveniently labeled replaceable cartridges simplify replacement, requiring no tools or specialist assistance. Auto Lock technology eliminates leaks.
FILTRATION STAGES
The AKV A1-PP polypropylene-based cartridge provides mechanical filtration down to 5 microns, extending the life of subsequent cartridges. Replacement is required every 3-6 months (depending on the initial water quality).
The AKV A2-CB module, based on activated carbon granules with increased adsorption capacity, provides deep purification down to 3 microns, effectively adsorbs residual chlorine, organic compounds, odors, and tastes, removes organic matter, and protects the membrane from oxidation. Replacement is required every 6-12 months (depending on the initial water quality).
The AKV RO-150 module, based on a low-pressure semi-permeable reverse osmosis membrane, provides ultra-deep water purification down to 0.0001 microns. It removes heavy metals, bacteria, and viruses up to 99%, purifying water to bottled quality. Replacement is required every 18-24 months (depending on the initial water quality).
The AKV A4-M module, based on pressed activated carbon enriched with strontium and mineralizer granules, enhances filtration properties and enriches water with calcium, magnesium, and potassium, leaving water fresh and soft, while effectively removing fluoride and heavy metals. Replacement is required every 6-12 months (depending on the initial water quality).
Specifications
Maximum capacity: 570 l/d – 150 GPD
Dimensions (Length x Height x Width): 362 х 415 х 190 mm
Operating temperature: +5 - +38 °C
Minimum operating pressure: 2.5 bar
Maximum operating pressure: 6.3 bar
Ph range: < 10 / > 4
Iron: no more than 0.3 ppm
TDS: ≤ 2000 ppm
Turbidity: ≤ 1 NTU
Water hardness: up to 350 ppm
Weight: 7 kg
The AKV A2-CB module, based on activated carbon granules with increased adsorption capacity, provides deep purification down to 3 microns, effectively adsorbs residual chlorine, organic compounds, odors, and tastes, removes organic matter, and protects the membrane from oxidation. Replacement is required every 6-12 months (depending on the initial water quality).
The AKV RO-150 module, based on a low-pressure semi-permeable reverse osmosis membrane, provides ultra-deep water purification down to 0.0001 microns. It removes heavy metals, bacteria, and viruses up to 99%, purifying water to bottled quality. Replacement is required every 18-24 months (depending on the initial water quality).
The AKV A4-M module, based on pressed activated carbon enriched with strontium and mineralizer granules, enhances filtration properties and enriches water with calcium, magnesium, and potassium, leaving water fresh and soft, while effectively removing fluoride and heavy metals. Replacement is required every 6-12 months (depending on the initial water quality).
Specifications
Maximum capacity: 570 l/d – 150 GPD
Dimensions (Length x Height x Width): 362 х 415 х 190 mm
Operating temperature: +5 - +38 °C
Minimum operating pressure: 2.5 bar
Maximum operating pressure: 6.3 bar
Ph range: < 10 / > 4
Iron: no more than 0.3 ppm
TDS: ≤ 2000 ppm
Turbidity: ≤ 1 NTU
Water hardness: up to 350 ppm
Weight: 7 kg
