Aquaphor ProPlus 380
Compact whole-house water softening and iron filtration system.
Filtration rate - up to 2,000 liters per hour
Dimensions - 42 x 51 x 85 cm
Regeneration duration - 32 min
.
Filtration rate - up to 2,000 liters per hour
Dimensions - 42 x 51 x 85 cm
Regeneration duration - 32 min
.
6400.00 Dhs
Add to compare
Compact, universal system that combines mechanical self-cleaning filter, iron remover and water softener. It's used to remove undesirable water constituents, incliding ferrous dissolved iron, dirt, sediment, chlorine, lead, uliminates dirt, sand, or large particles, from municipal or well water. Is it's certified for barium and radium 226/228 reduction according to NSF/ANSI Standard 44. System provides soft purified water for a long time, doesn't require replacement of modules. Effectively purifies any water, even with iron and manganese, while consuming a minimum amount of water for regeneration. It will condition water for up to 70 grains of hardness per gallon (1200 mg/l).
System is simple and easy to maintain, equipped with an overflow protection function, can be used as a main filter or as part of a water treatment system in private house, factories, restaurants. Compact dimensions and high performance characteristics allow to place softener even where a special place wasn't provided in advance.
Filtration rate: 2 m3/h
Dimensions: 45 x 51 x 85 cm
Gross weight: 62 kg
Power supply: 220/12 VAC, 50 Hz
Equipment:
System is simple and easy to maintain, equipped with an overflow protection function, can be used as a main filter or as part of a water treatment system in private house, factories, restaurants. Compact dimensions and high performance characteristics allow to place softener even where a special place wasn't provided in advance.
Filtration rate: 2 m3/h
Dimensions: 45 x 51 x 85 cm
Gross weight: 62 kg
Power supply: 220/12 VAC, 50 Hz
Equipment:

- Two-section filtration tank combines a self-cleaning 20 μm sand prefilter and a filter for removing iron, manganese and hardness salts. No cartridge replacement is required.
- Compacted layer of finely dispersed sorbent provides maximum efficiency in purifying water from dissolved iron, manganese and hardness salts. Allows significantly reduce - up to 70% - the amount of salt and water during regeneration.
- Patented flow distributor ensures water flows through the entire volume of the sorbent, eliminating the formation of non-working zones.
- Unique controller operating algorithm takes into account actual water consumption and allows select optimal operating mode for additional savings of water and salt for regeneration.
- Control valve is reliable, silent, and fully automatic - it ensures uninterrupted operation and automatic regeneration of the filter.
- Built-in self-cleaning filter doesn't require replacement of modules, it is washed during regular regeneration.
- Durable plastic housing
- KDF medium removes hydrogen sulfide
Maximum compensated hardness: 34 mg-eq/l
Maximum accumulated hardness: 49351 mg-eq/l
Maximum concentration of iron at the inlet: 2–10 mg/l
Minimum pH: 6
Salinity: not less than 200 mg/l
Amount of salt per regeneration: 2.7 – 4.5 kg
Regeneration duration: 32 (1.36 kg of salt) min
Amount of water per regeneration: 83 (1.36 kg of salt) l
Connection dimensions (inlet/outlet): 1" or 3/4"
Effective cross-section of the valve: 1"
Possible salt reserve: 68
Maximum temperature of supplied water: 50 °C
Pressure (minimum – maximum): 1.4 – 8.0 atm