Sorbent MS Filter media for manganese and iron (II) (III) removal (0,315-0,7mm)
Price on request
Add to compare
Description
It was developed and used for the purification of any type of water (drinking, industrial, circulating, waste) from a huge range of contaminants, including iron at concentrations up to 50 mg / l and manganese up to 2.5 mg / l.
Developed on a fundamentally different mineral base than Sorbent AS. contains catalytically active elements and is a second generation sorbent for solving a wide range of tasks in water treatment (removal of heavy non-ferrous metals, oil products, phenol, iron, manganese, radionuclides, increasing the pH of water, reducing the concentration of sulfates, phosphates, dry residue, reducing the color and turbidity of water The impurities subject to oxidation contained in the water are converted into coarse particles and retained in the subsequent layers of the load with removal by the reverse flow of water.
Working conditions
Layer height 40 - 100 cm
Filtration speed 10-15 m h /
Washing speed of the MS with expansion by 30-35% 50-60 m h /
Washing speed АС + МС with expansion by 30-35% 40-50 m h /
Backwash duration 10 min
Sorbent MS characteristics
Bulk density 1200 ± 50 kg m / 3
Material density 2850 kg m / 3
Specific surface area 60 ± 10 m2 /
Abrasion 0.01%
Grindability 0.19%
Intergranular porosity 47.5 ± 1.5%
Inhomogeneity coefficient 1.7 ± 0.1
Conditional mechanical strength 0.75%
Specific efficiency of natural radionuclides, no more than 60 Bq kg /
Distribution coefficient of radionuclides 10 - 103
Fractions 0.5-1.0 0.7-1.2; 0.7-1.5, 1.0-2.0, 2.0-5.0; mm
Estimated capacity for iron, manganese and suspended solids 1 g l /
Capacity for oil products in dynamic conditions 80 g kg /
pH minimum 5.0
It was developed and used for the purification of any type of water (drinking, industrial, circulating, waste) from a huge range of contaminants, including iron at concentrations up to 50 mg / l and manganese up to 2.5 mg / l.
Developed on a fundamentally different mineral base than Sorbent AS. contains catalytically active elements and is a second generation sorbent for solving a wide range of tasks in water treatment (removal of heavy non-ferrous metals, oil products, phenol, iron, manganese, radionuclides, increasing the pH of water, reducing the concentration of sulfates, phosphates, dry residue, reducing the color and turbidity of water The impurities subject to oxidation contained in the water are converted into coarse particles and retained in the subsequent layers of the load with removal by the reverse flow of water.
Working conditions
Layer height 40 - 100 cm
Filtration speed 10-15 m h /
Washing speed of the MS with expansion by 30-35% 50-60 m h /
Washing speed АС + МС with expansion by 30-35% 40-50 m h /
Backwash duration 10 min
Sorbent MS characteristics
Bulk density 1200 ± 50 kg m / 3
Material density 2850 kg m / 3
Specific surface area 60 ± 10 m2 /
Abrasion 0.01%
Grindability 0.19%
Intergranular porosity 47.5 ± 1.5%
Inhomogeneity coefficient 1.7 ± 0.1
Conditional mechanical strength 0.75%
Specific efficiency of natural radionuclides, no more than 60 Bq kg /
Distribution coefficient of radionuclides 10 - 103
Fractions 0.5-1.0 0.7-1.2; 0.7-1.5, 1.0-2.0, 2.0-5.0; mm
Estimated capacity for iron, manganese and suspended solids 1 g l /
Capacity for oil products in dynamic conditions 80 g kg /
pH minimum 5.0